.: UNIVERSAL TUNED PORT INJECTION HARNESS:.
.:SPEED DENSITY:.

REPLACE YOUR TIRED OLD CARB WITH FUEL INJECTON AND GET BETTER MPG
New TPI
stand alone EFI wiring harness . Manufactured by Larry's Electric. This
harness takes care of the headaches involved with installing Tuned port
injection on most all SBC engines or swapping a TPI engine into your vehicle,
and makes for a much easier installation. Fuel injection is well known for
improved gas mileage over carbs, and with prices today its well worth it. Our
harnesses are all made with top of the line copper strand wire. Each harness
comes complete with the necessary relays and its own fused power source. Each
harness comes complete with detailed installation instructions and full
technical support by phone or online. With over 15 years experience, if you got
a question we will answer it, and when you call you actually talk to someone who
makes the harness, unlike other companies. We use only GM color codes for easy
trouble shooting. Our harnesses come completely loomed with automotive grade
split loom and all wires are coated with a flame retardant coating. Each
terminal is machine crimped and tug tested, splicing is also done by machine and
followed up by hand soldering. We use all GM grade connectors. (no cheep knock
off's). Installation consists of simply laying out the harness on the
motor, plugging in the various devices, and hooking up only 3 wires,
ignition power, battery power, and your fuel pump power. We have provided
plenty of room for placement of the computer, each harness has 3 feet of reach
from the rear of the engine to the ecm, with an overall length of 5 feet. We
have also supplied the correct rubber grommet to install the computer inside the
car. Our harnesses remove all the provisions for the unwanted items that modern
FI engines come with. For example no VATS system, no Charcoal canister, no air
pump, no EGR, ect... which allows for a much cleaner installation. This harness
is perfect for dropping any TPI engine into any vehicle. As mentioned above
this auction is for a new harness. Harness must be used with 01227730 ecm
(speed density computer) and the correct prom chip with VATS removed. The ecm
and prom chip are availible from us for an addional cost.
If you would
like to speak to us please call 618-282-2852 Monday-Friday 8am-5pm CST
Connections
on the engine side.
TPS (THROTTLE POSITION SENSOR)
IAC (IDLE AIR CONTROL)
IAT (INTAKE AIR TEMP)
CTS ( TEMP SENSOR)
MAP (MANIFOLD ABSOLUTE PRESSURE)
KNOCK SENSOR
DISTRIBUTOR CONNECTION (SMALL OR LARGE CAP, YOU MUST TELL US AFTER PURCHASE)
O2 SENSOR (ONE WIRE STANDARD, BUT CAN BE CHANGED TO HEATED O2 AT CUSTOMER
REQUEST, free of charge)
INJECTORS 1,2,3,4,5,6,7,8
VSS AND 700R4 TRANSMISSION CONNECTIONS (IF USING THE 700R4)
CONNECTIONS
ON ECM SIDE
BLACK 24 PIN, BLACK 32 PIN, YELLOW 32 PIN ECM CONNECTORS
CHECK ENGINE LIGHT CONNECTIONS (LIGHT INCLUDED)
FUEL PUMP RELAY AND FUEL PUMP CONNECTION
FUSE BLOCK WITH BAT AND IGNITION CONNECTIONS
BRAKE PEDAL SWITCH CONNECTIONS (ONLY IF YOU USE THE
700R4 TRANSMISSION)
ALDL OBD diagnostic connector
Purchase this item online with
PAY PAL
or
We also accept visa/master card via phone or check/ money
order
618-282-2852
This item is also available in the water proof
version requiring the use of the 1227727 ECM. Please call as this one is
made to order.
Item Name: Universal TPI Speed Density Harness with 700r4
Item Number: TPI/700r4
Price: $275
Item Name: Universal TPI Speed Density Harness with out 700r4
Item Number: TPI W/O 700r4
Price: $275
|